#Siwarex fta firmware update update
#Siwarex fta firmware update full
#Siwarex fta firmware update software
#Siwarex fta firmware update Pc
#Siwarex fta firmware update windows

Three digital inputs and four digital outputs.Optional direct connection of a remote display via RS485 interface.Optional direct connection of an operator panel via Ethernet port (ModbusВ TCP/IP).Operation possible with or without failed SIMATIC CPU.Single (WP521 ST) and dual-channel (WP522 ST) variants are available.Uniform design technology and consistent communication in SIMATIC S7-1500.SIWAREX WP521 ST / WP522 ST offer the following key advantages: SIWATOOL V7, layout of the program window РћСЃРѕР±РµРЅРЅРѕСЃС‚Рё Creation/loading of external backup files.Recording and analysis of weighing sequence (trace).Parameter assignment and calibration of the scale.The following are just some of the tasks that can be carried out using SIWATOOLВ V7: The data can be read out using SIWATOOL V7 and exported to spreadsheet programs, thus enabling highly granular investigation and optimization. This trace records all the weight values and status information in 10 ms intervals. Reading the power fail-safe diagnostics buffer is also a useful feature for troubleshooting.

#Siwarex fta firmware update Pc

During servicing, the technician can use a PC to analyze and test the procedures in the scale. The program enables the scales to be parameterized and commissioned without the need for prior knowledge of the automation system.

#Siwarex fta firmware update software

The software is free of charge and part of the configuration package (see accessories).

#Siwarex fta firmware update windows

The software SIWATOOLВ V7 for Windows operating systems is optionally available for commissioning and servicing.

#Siwarex fta firmware update update

Please refer to the information at ДЄ firmware update of the modules can be performed via the TIA Portal (MMC card or by file selection) or SIWATOOL V7. The modules can be integrated into the plant network via the Ethernet interface of the modules, so that during servicing, remote access is easily possibly worldwide by means of SIWATOOL. Up to eight 350 Ohm load cells switched in parallel can be connected per scale (per channel). The impedance is continuously monitored every 100 ms. severing of a load cell cable), this bit can generate corresponding alarms in the controller and initiate measures. You can also freely define from which percentage deviation from the reference value a corresponding status bit is to be set. The total impedance of the connected cells is determined as the reference value during commissioning. The automatic impedance monitoring of the module also increases plant safety and availability. This simplifies work considerably for the service staff as no interventions in the controller are required.

In addition, languages can be added easily and quickly with the help of the corresponding functions von TIA Portal.ДЄs an alternative to the CPU/HMI, the module can also be put into operation and maintained conveniently and without a knowledge of SIMATIC via the PC software SIWATOOL V7. Customer- and plat-specific weighing applications can therefore be realized in an instant. The free вЂњready-for-useвЂќ software (can be downloaded in the Siemens Online Support) also contains fully fledged HMI configuration, which can be transferred to your own project as you wish and and freely edited. Commissioning, maintenance and operation of the scales can be performed fully from the CPU or HMI вЂ“ without additional programming work.

#Siwarex fta firmware update full

The ready-made function block provides full access to all parameters. The basic functions zeroing, taring and tara specification can easily be issued by the CPU/HMI via the ready-made function block or alternatively via a 24 V signal at one of the three digital inputs.

WP521 ST and WP522 ST provide simple weighing applications such as platform or hopper scales (ST = Standard). An RJ45 port is available on the bottom of the module for the Ethernet connection (SIWATOOL and Modbus TCP/IP). The power supply, load cells, RS485 interface and the digital inputs/outputs are also connected via the removable front connector.

This set is assembled with an appropriate front connector (must be ordered separately, see accessories and ordering data) and therefore guarantees optimum hardware design and EMC immunity. The modules are delivered ex works with a shielding set, comprising a shield clamp, shielding bracket and 24В VВ DC supply element with screw-type terminals. Assembly is therefore extremely easy and consistent with the remaining automation. The compact, 35В mm wide weighing modules can mounted directly on the SIMATIC standard mounting rail. Additional expensive communication cards are therefore not required when using SIWAREX weighing technology. SIWAREX WP521 ST and WP522 ST are technology modules of the SIMATIC S7-1500 Advanced Controller family and therefore communicate directly with the SIMATIC S7-1500 controller via the system bus.